C0632A-TOP
Lathe
Bench Lathe
C0632A-TOP Economic Metal Mini Bench Lathe
Features
-Precision ground hardened bedways.
-The spindle is supported wish precision roller bearings.
-Headstock gears are made of high quality steel, ground and hardened.
-Removable gap is provided for larger diameter work.
-Easy operation speed change levers.
-Easy operating gear box has various feeds and thread cutting function.
-Two types for selection: with foot stand in reserve or without foot stand.
Specifications
| Models | CO632A-TOPx750 | CO632A-TOPx1000 | CO636A-TOPx750 | CO636A-TOPx1000 |
| Swing over bed | 330 mm (13") | 360 mm (14") | ||
| Swing over cross slide | 198 mm (7-25/32") | 224 mm (8-13/16") | ||
| Swing in gap diameter | 476 mm (18-3/4") | 502 mm (9-1/3") | ||
| Swing in length | 210 mm (8-1/4") | 210 mm (8-1/4") | ||
| Center height | 166 mm (6-1/2") | 179 mm (7") | ||
| Adm its between | 750mm (30") | 1000 mm (40") | 750 mm (30") | 1000 mm (40") |
| Bed width | 187 mm (7-3/8'") | 187 mm (7-3/8'") | ||
| Bed length | 1405mm (55-5/16") | 1655mm (65-1/8") | 1405 mm (55-5/16") | 1655mm (65-1/8") |
| Bed height | 290 (11-13/32") | 290 (11-13/32") | ||
| Spindle bore | 38 mm (1-1/2") | 38 mm (1-1/2") | ||
| Spindle nose | D1-4" | D1-4" | ||
| Taper in nose | NO. 5 morse | NO. 5 morse | ||
| Speeds number | 8 | 8 | ||
| Speeds range | 70-2000 rpm | 70-2000 rpm | ||
| Cross slide width | 130 mm (5-3/32") | 130 mm (5-3/32) | ||
| Cross slide travel | 170 mm (6-11/16") | 170 mm (6-11/16") | ||
| Compound rest travel | 80 mm (3-1/8") | 80 mm (3-1/8") | ||
| Lead screw diameter | 22 mm (7/8") | 22 mm (7/8") | ||
| Lead screw thread | 8T.P.I. or 3 mm pitch | 8T.P.I. or 3 mm pitch | ||
| Feed rod diameter | 19mm (3/4") | 19mm (3/4") | ||
| Cutting tool max section | 16mmx16mm (5/8"x5/8") | 16mmx16mm (5/8"x5/8") | ||
| Threads imperial pitches | 34 Mos.4-56 T.P.I | 34 Mos.4-56 T.P.I | ||
| Threads metric pitches | 26 Nos. 0.4-7 mm pitch | 26 Nos. 0.4-7 mm pitch | ||
| Longitudinal feeds imperial | 32 Mos. 0.002-0.0548"/Rev | 32 Mos. 0.002-0.0548"/Rev | ||
| Longitudinal feeds metric | 32 Mos. 0.052-1.392"/Rev | 32 Mos. 0.052-1.392"/Rev | ||
| Cross feeds imperial | 32 Mos. 0.007-0.0187"/Rev | 32 Mos. 0.007-0.0187"/Rev | ||
| Cross feeds metric | 32 Mos. 0.014-0.380"/Rev | 32 Mos. 0.014-0.380"/Rev | ||
| Quill diameter | 32 mm (1-1/4") | 32 mm (1-1/4") | ||
| Quill travel | 100mm (3-15/16") | 100mm (3-15/16") | ||
| Quill taper | No. 3 morse | No. 3 morse | ||
| For main motor | 2PH, 3PH or 2PH,1PH | 2PH, 3PH or 2PH,1PH | ||
