Flat Bed CNC Lathe ITK-6163Z
Flat Bed CNC Lathe3
ITK-6163Z ITK-6180Z Dalian DMTG Economic Horizontal Lathe CNC
Features:
1. Construction casting molded with resin sand of bed, headstock, saddle plinth, ect;
2. Turcite-B coated on mating surfaces between saddle and guideways;
3. Precision ballscrew, high rigidity precision compound bearings ensure accurate positioning and efficient driving of cnc lathe. Centralized oil lubricator providing forced automatic lubrication onto ballscrew, mating surfaces;
4. High spindle speed with wide variable speed ranges. Low noise 80db, CKE-Zseries cnc lathe machine adopting the smart automatic gear changing mechanism enables automatic speed changes among low, medium, high speed ranges without turning off the cnc lathe machine. CKE-i series cnc lathe machine with independent spindle strcture and frequency converted motor or servo motor enables high spindle speed and stepless spindle changing;
5. Flexible control panel enables convenient tool setting for the cnc lathe;
6. Popular full enclosed guards with interlock offer a waterproof and chip-free environment;
7. Vertical 4-p toolpost, horizontal 6-p toolpost, quick change toolpost, etc are available for your selection for this cnc lathe machine;
8. Optional, pneumatic, hydraulic chuck and tailstock are available for this cnc lathe machine;
9. FANUC, SIEMENS, FAGOR, GSK, etc control systems can be appointed E-handwheel function can also be equipped.
Specification
Item | Unit | ITK-6163Z | ITK-6180Z |
Max. swing over bed(mm) | mm | 630 | 800 |
Width of bed (mm) | mm | 550 | 550 |
Max. length of work piece (mm) | mm | 1000~4000 | 1000~4000 |
Max. swing over slide (mm) | mm | 320 | 490 |
X travel (mm) | mm | 320 | 420 |
Z travel (mm) | mm | 790~3790 | 790~3790 |
Spindle nose | C11 | C11 | |
Chuck size (mm) | mm | 400 | 400 |
Taper of spindle bore | 1:20 | 1:20 | |
Spindle bore (mm) | mm | 100 | 100 |
Spindle speed (Frequency conversion motor) | r/min | 40-178 | 40-178 |
71-310 | 71-310 | ||
222-1000 | 222-1000 | ||
Steps of spindle speed | 4 step actuator | 4 step actuator | |
Frequency conversion motor power (kW) | kw | 11 | 11 |
Rapid traverse X/Z (m/min) | m/min | 4/8 | 4/8 |
Vertical 4-position Tool post changing time (s) | mm | 2.6 | 2.6 |
Horizontal 6-position Tool post changing time(s) | s | 3 | 3 |
Diameter of tailstock quill (mm) | mm | 100 | 100 |
Travel of tailstock quill (mm) | mm | 240 | 240 |
Taper of tailstock quill | M5 | M5 |