เครื่องปั้มอัตโนมัติ Press Machine ITK-LR

Features

1, Hydraulic press adopts the four-column and three-plate structure, the vertical precision of the movable plate is controlled by four precision guide sleeve, and the parallel precision of the lower working face and the upper working face is up to high.

2, the series of hydraulic machine core liquid as the medium, the use of rapid sub-cylinder hydraulic circuit, low oil temperature, fast speed in 160MM/S above, slow speed about 15-20mm /S.Comprehensive safety design, two hands operation, with emergency button and up and down inch mode button;The position of the top dead point is controlled by the proximity sensor.

3. The working table is equipped with blanking trough and air blowing device, which is humanized designed to improve production efficiency;

4. The pressure, stroke, speed, pressure holding time and closing height of this series of hydraulic press can be adjusted according to the demand for convenient operation;

5. The series of hydraulic press is equipped with shockproof pad under the working table, with low noise and portable.

6. This series of hydraulic press is equipped with safety protection device. Safety doors are equipped on the left, right and back of the working table.

Scope of application:

1. This series of hydraulic press is suitable for blanking and shaping of various aluminum and magnesium alloy die-casting products and cutting of plastic products:

2. Shaping of all kinds of metal products, secondary pressing and shaping of silicon steel sheets for motors, cutting of plastic products:

3. It is also applicable to the forming of plastic materials, such as blanking, stretching, embossing, etc., as well as the pressing of plastic and powder products, etc

4. High efficiency, high force, high speed of the new generation of hydraulic punch, automobile and motorcycle parts industry use/widely.