เครื่องเลื่อยวงเดือน MITRE BAND SAW MACHINE
รุ่น TYX-330รุ่นนี้เป็นรุ่น แบบ SINGLE COLUMNVoltage:380V/220Vเป็น Band saw อีกหนึ่งชนิด
เครื่องเลื่อยวงเดือน ตัดได้ 0-45 องศา ใช้ตัดง...
เครื่องเลื่อยวงเดือน Mitre Band Saw Machine TYX-450
เครื่องเลื่อยวงเดือน Mitre Band Saw Machine
รุ่น TYX-450
Parameter
|
Type |
TYX-450 (Two column type) |
|
Cut capacity H*W (mm) |
●450 □ 600*400 |
|
●450 □ 320*350 |
|
|
Band saw angle (mm) |
0° -45° |
|
Saw belt size(mm) |
4800*34*1.1 |
|
saw belt line speed(m/min) |
40/60/80 cone pulley |
|
Main generator power(kw) |
4 |
|
Hydraulic generator power(kw) |
1.5 |
|
Cooling generator power (kw) |
0.09 |
|
Working clamp style |
Hydraulic |
|
Saw belt tighten style |
Hydraulic |
|
Main transmit structure |
Turbine |
|
Loading style |
Hydraulic Roller feeding |
|
Working table height (mm) |
650 |
|
Weights of machine (kgs) |
1500 |
|
Packing dimensions(mm) L*W*H |
2000*1200*1500 |
|
OPTIONAL: |
|
|
CHANGED VOLTAGE |
|
|
AUTO CLEAN CHIP |
|
|
BAND SAW BLADE |
|
|
WOODEN CASE |
|
Description
Combustible gas cut off and
During plasma cutting, due to the use of thermal energy to cut off, the surface is affected by heat, its structure changes and produces a qualitative change layer. Heat treatment is required for reprocessing. Not only a processing procedure is added, but also the production cost is increased due to the need of heat treatment. A kind of
the current situation of discharge cutting generally uses high hardness materials such as special steel after treatment or special difficult cutting materials
Low rate, can not be widely used in steel cutting operations.
Problems such as flatness, deformation and skew force. Because cutting off requires a considerable amount of force, so it is necessary to increase the cost of equipment, which is often used to cut off forging materials with weight requirements. Chinese style
With the advancement of materials and the increase of cutting off of new materials, these disadvantages will be more and more affected in the future
Cutting characteristics of band saw blade
From the comparison of band saw blade cutting, as an advantage, it has a stronger versatility for steel. It is now clear that almost all types of steel can be cut with a band saw blade. A kind of
If the material utilization ratio is superior, as shown below, the material utilization ratio is closely related to the size of the saw joint, which has a great impact on the cutting cost. In today's resource saving, using band saw machine and band saw blade has obvious advantages. In Europe, where the cutting method relies on bow sawing machine and circular saw, especially in Germany, it can be seen that band sawing machine is widely used, which fully proves the advantages of band sawing machine.
