เครื่องเลื่อยวงเดือน Mitre Band Saw Machine TYX-400
Type |
TYX-400 (Two column type) |
Cut capacity H*W (mm) |
●400 □ 500*400 |
●400 □400*400 |
|
Band saw angle (mm) |
0° -45° |
Saw belt size(mm) |
4800*34*1.1 |
saw belt line speed(m/min) |
40/60/80 cone pulley |
Main generator power(kw) |
4 |
Hydraulic generator power(kw) |
0.75 |
Cooling generator power (kw) |
0.09 |
Working clamp style |
Hydraulic |
Saw belt tighten style |
Hand |
Main transmit structure |
Turbine |
Loading style |
Roller feeding |
Working table height (mm) |
650 |
Weights of machine (kgs) |
1500 |
Packing dimensions(mm) L*W*H |
2000*1200*1500 |
OPTIONAL: |
|
CHANGED VOLTAGE |
|
AUTO CLEAN CHIP |
|
BAND SAW BLADE |
|
WOODEN CASE |
Description
Semi-automatic Metal Cutting Angle Band Saw Machine
for cutting profiles and solid materials in steel and non-ferrous metals with best-in-class price-performance ratio
By considering the cutting and feed force, tension and band camber, a simplified force analysis mode was set up to investigate the failure pattern of Metal Cutting Angle Band Saw Machine
blade crooked cutting. The stress distribution and its variation trends of band saw blade were obtained through numerical simulation. The result shows that the stress in the tooth side is more likely to be pushed for the situation with larger work-piece, cutting force, insufficient tension and band width. Thus, the band saw blade is bent near the teeth tip, and then crooked cutting happens. Metal Cutting Angle Band Saw Machine Under the same failure standard and cutting parameters, when the tension of band increases from 130 MPa to 190 MPa, the cutting pieces were added by 177%. Changing the 27 mm band saw blade to 34 mm leads to nearly 50% more cutting pieces, but it is dropped by 83% when increasing the width of the work-piece from 80 mm to 240 mm.